Section 12 – Troubleshooting Page 12-63 CFP83 Series Engine Vibration Excessive at Rated Speed Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Engine runs rough or is misfiring. Refer to the Engine Runs Rough or Misfires Under Load symptom tree in this section. Alternator bearing is worn or damaged. Check if the alternator is vibrating excessively. Replace the alternator if necessary. Refer to Alternator Removal/Installation in Section 7. Water pump bearing is worn or damaged. Check if the water pump is vibrating excessively. Replace the pump if necessary. Refer to Water Pump Removal/Installation in Section 7. Automatic belt tensioner bearing is worn or damaged.
Check if the belt tensioner is vibrating excessively. Replace the tensioner if necessary. Refer to Automatic Belt Tensioner Removal/Installation in Section 7. Vibration damper is damaged. Inspect the vibration damper. Refer to Vibration Damper, Viscous (001-052) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump. Engine mounts are worn, damaged, loose, or not correct. Verify the condition of the mounts. Refer to Engine Mounts (016-010) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Calibrate the fuel pump.