Page 12-76 Section 12 – Troubleshooting CFP83 Series Excessive White Exhaust Smoke Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Coolant temperature is below specification or the intake manifold air temperature is below specification. Refer to the Coolant Temperature Below Normal (Engine Running) symptom tree. Poor fuel quality or wrong fuel grade. Operate the engine from a tank of high-quality fuel. Refer to Fuel Recommendations and Specifications in Section 10. Fuel injection pump timing is not correct. Put the engine at top dead center. Check and adjust the fuel timing.
Refer to Fuel Injection Pumps, In-Line (005-012) or Fuel Injection Pump, In-Line, Spill Port Timing (005-013) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Injector sealing washer not correct. Remove injector and install the proper sealing washer. Refer to Injector (006-026 in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Injector sealing washer not correct. Remove injector and install the proper sealing washer. Refer to Injector (006-026 in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Injectors worn or malfunctioning. Remove and test the injectors. Replace as necessary.
Refer to Injector (006-026 in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02.