Section 12 – Troubleshooting Page 12-79 CFP83 Series Fuel Consumption Is Excessive (Cont) Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Intake and exhaust system manifold leaks are present. Check the intake and exhaust systems for leaks. Refer to Air Leaks, Air Intake and Exhaust Systems (010- 024) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fuel injection pump timing is not correct. Put the engine at top dead center. Check and adjust the fuel timing. Refer to Fuel Injection Pump, In-Line, Spill Port Timing (005-013) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Fuel injection pump is malfunctioning.
Replace the fuel pump. Refer to Fuel Injection Pumps, In-Line (005-012) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Valves are not sealing correctly. Check and adjust the valves. Refer to Overhead Set (003-004) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Hour meter is malfunctioning. Check operation of the hour meter. Replace the tachometer if necessary. Refer to Tachometer Removal/Installation in Section 7. Lubricating oil level is above specification. Check the oil level. Refer to Check Engine Oil Level in Section 5. Drain excess oil and correct the deficiency in maintenance processes.
Contact an Authorized Cummins Repair Facility.