Cummins — Cummins CFP83 Series Fire Pump Drive Engines Operation & Maintenance Manual

Page 12-82 Section 12 – Troubleshooting CFP83 Series Lubricating Oil Contaminated NOTE: If excessive sludge is present in the oilpan, refer to Lubricating Oil Sludge in the Crankcase Excessive in this section. Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Bulk oil supply is contaminated. Check the bulk oil supply. Replace it is necessary. Refer to Lubricating Oil Recommendations and Specifications in Section 10. Drain the oil and replace with non-contaminated oil. Also, replace the oil filter. Refer to Change Lubricating Oil and Filters in Section 7. Fuel is present in the lubricating oil. Refer to the Fuel in Lubricating Oil symptom tree.

Coolant is present in the lubricating oil. Refer to the Coolant in Lubricating Oil symptom tree in this section. Metal is present in the lubricating oil. Contact an Authorized Cummins Repair Facility. Identify unknown lubricating oil contamination. Analyze the oil and inspect the filters to identify the contamination. Contact an Authorized Cummins Repair Facility. Contact an Authorized Cummins Repair Facility.