Page 12-98 Section 12 – Troubleshooting CFP83 Series Crankcase Gases (Blowby) - Excessive Drawing No. 9777, Section 12, Rev. 02-07 Cause Correction Cylinder head valve guides are excessively worn. Check the valve guides for wear. Replace the cylinder head if necessary. Refer to Cylinder Head (002-004) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Pistons or piston rings are worn, damaged, or not correct. Check the pistons for correct part numbers. Refer to Control Parts List (CPL), Bulletin 3379133 or 4021327. Check the pistons and rings for wear and damage.
Refer to Piston (001-043) and Piston Rings (001-047) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Turbocharger oil seal is leaking. Check the turbocharger compressor and turbine seals. Refer to Turbocharger (010-033) in Troubleshooting and Repair Manual C Series Engines, Bulletin Number 3666003-02. Contact an Authorized Cummins Repair Facility.