Page 4-4 Section 4 – Maintenance Guidelines CFP83 Series Tool Requirements Most of the maintenance operations described in this manual can be performed with common hand tools (metric and S.A.E. wrenches, sockets, and screwdrivers). The following is a list of special service tools required for some maintenance operations: Contact your nearest Cummins Authorized Repair Location for the required service tools. Drawing No. 9777, Section 4, Rev.
02-07 Tool Part Number Description CC-2802 Coolant test kit CC-2800 Refractometer ST-1273 Pressure gauge 3375045 Torque wrench (0 to 175 ft-lb) 3375049 Oil filter wrench 3376807 Engine coolant and fuel filter wrench 3377161 Digital multimeter 3822524 Belt tension gauge, click type (v-belts and ribbed with 4 or 5 ribs) 3822525 Belt Tension Gauge, Click-type (for V-ribbed with 6 to 12 ribs) 3824556 Charge air cooler (CAC) pressure kit 3824591 Engine barring gear 3824783 Torque wrench (0 to 300 in-lb) 3824842 M10 Compuchek® fitting 3825157 Fuel Injector Connector Puller 3825156 Fuel Injector Puller Sockets Wrenches Other 10 mm 8 mm Engine Barring Gear, Part No.
3377371 12 mm 13 mm Allen Wrench (8 mm) 13 mm 15 mm Breaker Bar (3/8-in drive) 15 mm 19 mm Flat Screwdriver 17 mm 22 mm Ratchet (3/8-in drive) 18 mm 24 mm Ratchet (1/2-in drive) 19 mm 17 mm (open end) Filter Wrenches (75 to 80 mm, 90 to 95 mm, and 118 to 131 mm) 22 mm Pliers 27 mm Torque Wrench T-Bar Puller (75 mm)