CNH T8000 — Disassembly

Section 25 - Four-Wheel Drive Front Axle - Chapter 11 STEP 31 STEP 34 RD02M033 Remove the snap ring from the upper suspension swing arm. RD02M036 Remove the upper pin. STEP 32 STEP 35 RD02M037 Remove the snap ring from the suspension cradle. RD02M034 Use a magnet and remove the upper swing arm thrust washer. Note that there is a dowel pin in the shaft. STEP 36 STEP 33 RD02M038 Remove and discard the seals from both sides. NOTE: Seals are different sizes. RD02M035 Use a puller to remove the upper swing arm pin. Be sure to catch the dowel pin when removing the puller. 25-11-9