Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK BEFORE STARTING CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING stopped and may cause serious burns. Wait for the oil 3. Fully insert dipstick (G) into filler pipe (F), then remove it. higher than H, remove cover (1) in the 3 - 72 Always chec k the items in this se ction b efore st arting the engine each Part s and oil a re at high te mperature immediately aft er the engine is temperature to go down be fore performing th is operat ion. 1. Open the engine sid e cover o n the l eft side of the chassis. 2. Remove dipstick (G) and wip e the oi l off with a cloth. 4. The oil le vel should b e betwee n the H and L marks on dipstick (G).

If the oil level is below the L mark, add oil through oil filler If port(F). oil filler 5. underpar t of the truc 6. Take the end of hos e (2) out of the i nspectio n window . 7. Loosen d rain plug (P ), drain e xcess oil and c heck the oil level again.