Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE WARNING oil over yourself. 4 - 72 The parts and oil is very hot jus t after the operation. Wait until the oil temperature drops, then start th The undercover is heavy (28 kg (62 lb)). Never try to open or close the cover when directly beneath it. When removing bolts (2), carry out the work from the rear of the cover s o that you can easily get out of the way. When removing drain plug (5) of the damper case, take care not to get Quantity of replacement oil: 1.3 liters (0.34 US gal) 1. Remove the undercover fro body as follows. 1) Remove two bolts (1) f body. 2) Holding the cover, remo of the machine body.

3) Lower and open the co (A) Front of machine (B) Dangerous place 1. Remove the undercover fro m the rear bottom of the machine rom the front side of the machine ve two bolts (2) from the rear side ver gradually. 2. Remove oil level plug (3) a nd oil filler plug (4), then remove drain plug (5) to drain the oi plug (5). 3. Add oil through the hole of l. After the all oil is drained, tighten oil filler plug (4) until the oil level the hole of oil level plug (3). plugs (3) and (4). reaches the bottom edge of 4. After refilling the oil, tighten