. MAINTENANCE SERVICE PROCEDURE EVERY 4000 HOURS SERVICE REPLACE ACCUMULATOR (FOR CONTROL CIRCUIT) WARNING the the a to replace the accumulator. 4 - 74 Maintenance for every 50, 250, 500, 100 0 and 2000 hours serv ice should be carried out at th Replace the accu mulator every 2 years or every 400 0 hours, w The accumulator is charged with high-pressu re nitrogen ga s, so mista ken operation may cause an explo sion, which will lead to serious injury or da mage. When handling the accumulator, always do a s follows. The pressure in the hydraulic circuit cann ot be complete ly removed . When removing the hydraulic e quipment, do not stand in the direction t the operation.
hat the oil spurts out when carrying out t he operatio n. In addition, loosen the bolts sl owly when carrying out ble the accumulator. ear flame or dispose of it in fire. es in it or weld it. it, or subject it to any impact. Do not disassem Do not bring it n ear flame or dispose of it i Do not make hol Do not hit it, roll it, or subject it to any imp When disposing of the accumulator, the g as must be re leased. Ple ase contact your Komatsu distri butor to have this work carried out. If operations ar accumulator has remaining pressu failure on the ma e continued after th dropped, it will be im re in the hydraulic cir chine.
Please ask yo e performance of t possible to release t cuit if there should be ur Komatsu distributor CHECK WATE R PUMP Check the water pump and its relative pa rts for water leak, and i f anything abnormal is found, call on your Komatsu distributor for rep airs or replacement. CHECK START Contact your Kom atsu distributor to hav e the starting motor ch ecked. If the engine is st arted frequently, have t his inspectio n carried