. ATTACHMENTS, OPTIONS HANDLING TRIMMING DOZER WHEN REQUIRED REPLACE CUTTING EDGE EVERY 50 HOURS SERVICE DRAIN WATER, SEDIMENT FROM FUEL TANK (MACHINE EQUIPPED WITH EXTRA FUEL TANK) 6 - 18 Replace th e cutting ed ge before it wea rs to the end fac e of the blade. The cutting edg e is we lded to the blad When repl acing the cu tting edge,pleas e ask your Komatsu distributor to carry out the repla cement operation. Cutting gd ges part no. : 144-978-1120 ( Weigh t: 100 kg (221 lb Carry out t his procedu re before operati ng the machine. Prepare a container to catch the fue l that is drained. 1.
Open t he inspecti on cover at bott om of upper fue l tank loosen valve(1), and drain sedim ent accumulat on bottom together wi th mixed water a When doing this, b e careful not to get fuel on yourself. 2. When clear f uel co mes out, close d rain valve (1). 3. Lossen valv e (2) at th e bottom o tank drain sedime nt accumulated with mixed water a nd fuel. When doing this, b e careful not to get fuel on yourself. 4. When clean fuel c omes out, close drain valve (2).