. OPERATION EXPLANATION OF COMPONENTS the 2) The brightness can be adjusted by operating the 3 - 30 METHOD OF USING USER AD The adjust mode has function s of changing the intensity of the panel backlight and the co ntrast of LC D panel. They are 1. Adjusting backlighting of li 1) The diagram on the brightness of the back lighting of the liquid crystal p ane This display will be switched to the screen adjustment display, if t is turned to the U po information switch. The higher the numbe r, the brighter the screen the lower the number, > position:
Number in The brightness of the b acklight for the LCD gauges may held constant by turn switch to the U positi REMARK eturn to the maintenance mode, operate the buzzer cancel switch to t. To r eturn to the maintenan ce mode, operate the buzze r cancel s witch to The brightness of the bac klighting of the monitor pane l differs a ccording t o whether the front la mp is lit o r not. Entering this mode when t he front lamps are lit makes i t possible to adjust the brightness when t he front l amps are l it. In the same way, entering this mode when the front lamps are not lit makes it possible to adjust the amps are not lit. the ps make possibl brightness when the front l