. OPERATION EXPLANATION OF COMPONENTS CONTROL LEVERS AND PEDALS (1) (2) (3) Work equipment lock lever Parking brake lever Steering, forward-reverse, gear shift lever (4) (5) (6) Brake pedal Decelerator pedal Blade control lever WORK EQUIPMENT LOCK LEVER WARNING work of work equipment control lever REMARK When starting the engine, to ensure safety, always set the work equipment lock lever to the LOCK position. 3 - 37 When leaving the operator's co mpartment, set the work equipment l ock lever se curely to the LOCK position. If the equipment lock lever is not at the injury.
LOCK position and the control levers are touched by mistake, it may lead to serious pe If the work equipment lock lever is not set securely to the LOCK position, the wor k equipment may move and cause s injury. Check that it is in the posi tion shown in the diagram. When parking the machine or wh en carrying out maintenance, always lower t he w ork equipmen t to the ground, then work equipment lock lever to the LOCK position. This lever (1) is a lock device for the work equipment control lever. ment does not move even when ent control lever is operated ent moves according to operation