Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS Gear shifting When UP switch (U) or DOWN switch (D) is pushed, the transmission speed will change. UP switch (U): Each time the switch is pressed, the transmission will up shift one speed. the speed in each speed range, see WARNING 3 - 39 DOWN switch (D): Each ti ressed sion will down shift one s The re are 3 forward and 3 r For details of the maximu "SPECIFICATIONS (PAGE REMARK d is displayed on panel A on the monitor panel according to the gearshift operation. e display panel. ayed on the display panel. yed on the display panel. er is locked, P is displayed.

d of shifting gears according to the shift mode, see the "SHIFTING GEARS (PAGE tion means that the selected speed range is displayed at the NEUTRAL position (N) The speed range being use d is displayed on panel A on the monitor pane l according to the g earshift operati Neutral: N is displayed on th FORWARD 2nd: F2 is displ ayed on the display pan REVERSE 3rd: R3 is displa yed on the display panel Whe n the parking brake lev F or details of the metho 3 b -99)". Shift mode selec efore starting.

O perating counter-rotatio Whe n operating the counter-rot ation turn, if the load on the left and righ t is not balanced, the machine m ay make a pivot tu rn, so chec k the ground conditions an d be careful not to hit any obstacle s when carrying out the operation. With the lever at the NEU TRAL position (N), move the lever partially in the direction of tu rn. The left and right tracks will rotate in o pposite directions, an d the machine will m ake a slow counterrotation turn. If the l ever is operated further, the speed of increase. rn the speed of the counterrotation turn will (R): Right counterrotation tu (L): Left counterrotation turn