Weichai — Weichai 495 Series Diesel Engine Operation and Maintenance Manual

sealed before delivery. The customers shouldnt adjust it privately. The injector is Model PB35S and of a single hole shaft needle type. The fuel should be atomized evenly after being sprayed, and the fuel stopping should be functioned at once, no fuel late drops of leakage. When the fuel atomized not well, the injector shoul.d be tested and adjusted on the injector test 'bench. The needle valve mate is matched mate, never exchanged when dismantled. When the injector is installed on the cylinder head, there is a copper washer on the front, this can assure the tightness. 7.

Lubricating System The engine is lubricated by pressure oil combined with splash oil, the layout of lubri- cating system is shown in Fig. 6. the fuel injection pump, air compressor, power take - out equipment should .be added engine oil separately. When changing the engine oil, the oil filter wick or oil filter should be changed at the same time. Fig. 6 Layout of lubricating system 1. Oil temperature gauge 2. Piston and connecting rod assembly 3. Oil sump 4. Sump strainer and oil suction pipe 5. Oil pump 6. Centrifugal bypass type oil filter 7. Idling gear shaft and bushing 8. Oil filter 9. Rotating valve 10. Oil pressure gauge 11.

push rod, valve tappet and cylinder block valve tappet hole 12. Valve and valve guide 13. Rocker arm and its shaft 14. Main oil passage 15. Camshaft and bearing 37