Weichai — Weichai 495 Series Diesel Engine Operation and Maintenance Manual

(4) Fuel inlet and outlet· connector ( 4 ) Tighten, replace parts 5. Fuel atomized not well screw· is loose 5. (1) Replace ( 1) Needle valve is distorted or worn out (2) Bad seal of the needle valve (2) Repair or replace ( 4 ) Needle valve blocked ( 4 ) Clean or replace 12. Governor malfunction Trouble cause and its feature Remedy 1. Unsteady speed . (1) Too large of camshaft axile lash (2) Cylinders fuel supply uneven to 1. ( 1) Readjust (2) Readjust much (3 ) Fly - weight assembly installed improperly, too large stagger of (3 ) Recheck and assemble fly hammer bracket shaft (4) Fuel cock worn out or bad seal (4 ) Repair or replace ~ 2. Too high idling speed 2.

ches its positon (2) Tooth rod is not flexible ( 1) Operating handle lever no rea - (1 ) Inspect and adjust (2) Readjust or repair 3. Speed floating 3. ( 1) Speed adjusted spring distorted (2) Fly hammer assembly loosen (1 ) Replace the speed adjusted sping (3)Too large friction resistance (3 ) Repair and eliminate Check and tighten inside the governor (4) Too Large axile lash of the (4 ) Readjust 4. Overrunning of the engine injection pump camshaft 4. ( 1) Toothe rod is not flexible (2) Lubricated not well,shaft sleeve ( 1) Readjust and repair (2) Check and repair of the governor burned out. ~ 4 ) nigh speed limit screw loo~ened 1':\ ) I=IV hammer assembly loosened (3 ) check and.

tighten (4 ) Readjust · 59 ·