[4Y ENGINE MODEL] 1 Eng~ne hood removal (I) Dlsconnect the engine hood damper from the frame bracket (2) Dlsconnect the engine hood stay from the frame bracket (3) Remove the hlnge set bolts (2 pcs on each side), and re - move the engine hood englne hood 2 Radlator cover and toe board removal Removing the Engine Hood LAPIZ-9.10 3. Battery ASSY removal (I ) Disconnect the battery terminals. Caution: Always disconnect the battery negative ( - ) terminal first. (2) Remove the battery stopper (3) Remove the battery ASSY. 4. Battery case removal ( 1 j Remove the set bolts (3 pcs.), and remove the battery case. Removing the Battery ~ ~ ~ 1 2 .
1 7 5 Electr~cal wirlng and fuel hose drsconnec- tion ( 1 ) Disconnect the starting motor bond strap (2) Disconnect the connector of each electrical wirlng (3) Drsconnect the fuel hose 6. Horn ASSY removal f l ) Disconnect the wiring at the connec - tor. (2) Remove the set bolts (2 pcs.) and remove the horn ASSY. Removing the Battery Case ~ ~ ~ 1 2 . 1 9 7. Air cleaner ASSY removal ) Remove the hydraulic tank breather. (2) Loosen the hose ciamp for the air cleaner hose. ( 1 (3) Remove the air cleaner case set bolts (4 pcs ), and remove the air cleaner ASSY. Removing the Air Cleaner -