USE OF THE MACHINE Before moving the machine, check the instruments, warm up the engine and the hydraulic oil, make sure that the rotation lock is engaged, that the safety device is released, that the blade is raised and that the work equipment is at least at 40-50 cm (16 to 20 in) from the ground; the control levers must be in the neutral position. 1 - Pull the accelerator lever and set the engine running at idling speed. RWA06000 2 - Operate the levers (right and left) at the same time, shifting them forward to make the machine advance or backward to make it move in reverse. 3 - Press the speed increase pedal. RWA05720 102 F N R F R RWA07370