Komatsu — 3.10 LIFTING THE MACHINE

LIFTING THE MACHINE 3.10 LIFTING THE MACHINE DANGER To lift the machine, the cables and the upper lifting bar used must be properly sized; do not use worn cables or cables with broken strands. Do not lift the machine before the operator has got off and make sure that there is no one around before lifting it. Lift the machine by proceeding as follows. 1 - Rotate the upper structure so that the blade is behind the operator and raise the blade completely. Extend the bucket, boom and arm cylinders completely and make sure that the control levers are in neutral. 2 - Swing the boom to the central position and engage the control pedal safety device.

3 - Shift the safety device lever to the lock position and stop the engine. 111 MACHINE WITH CANOPY 4 - Insert a metal or nylon rope in the four upper holes. Fix the ropes with the appropriate locks or with safety pins. 5 - Connect the ropes to the lifting hook as indicated in the fig- ure. IMPORTANT • Always use the four coupling points provided for the lift- ing operations. RWA07470 4 - Insert a metal or nylon rope in the four upper holes. Fix the ropes with the appropriate locks or with safety pins. 5 - Connect the ropes to the lifting hook as indicated in the fig- ure. IMPORTANT • Always use the four coupling points provided for the lift- ing operations.

RWA07470 RWA07470 MACHINE WITH CAB 6 - Insert a metal or nylon rope in the two holes provided on the blade ends and in the boom hole. Fix the ropes with the ap- propriate locks or with safety pins. 7 - Connect the ropes to the upper lifting bar as indicated in the figure. IMPORTANT • Always use the three coupling points provided for the lift- ing operations. RWA07460 8 - Lift the machine slowly until the ropes are stretched and make sure that the fastenings are correct before lifting the machine definitively. CAUTION • When lifting the machine, make sure that it is correctly balanced and that it remains in horizontal position during the lifting operations.

• Do not lift the machine with swung boom or without using the lifting bar. RWA07460 6 - Insert a metal or nylon rope in the two holes provided on the blade ends and in the boom hole. Fix the ropes with the ap- propriate locks or with safety pins. 7 - Connect the ropes to the upper lifting bar as indicated in the figure. IMPORTANT • Always use the three coupling points provided for the lift- ing operations. 8 - Lift the machine slowly until the ropes are stretched and make sure that the fastenings are correct before lifting the machine definitively.

CAUTION • When lifting the machine, make sure that it is correctly balanced and that it remains in horizontal position during the lifting operations. • Do not lift the machine with swung boom or without using the lifting bar.