TROUBLESHOOTING 3.16 TROUBLESHOOTING 3.16.1 OCCURRENCES THAT ARE NOT FAILURES The following occurrences are not failures: 1 - When the boom is retracted, the movement speed decreases temporarily, according to the position of the boom (more or less vertical. 2 - The boom speed decreases temporarily according to the po- sition of the bucket teeth (more or less horizontal). 3 - When travelling down a steep slope at low speed, a noise coming from the travel motor may be heard. RWA06050 RWA06060 123 3.16.2 HOW TO REMOVE THE MACHINE DANGER • When removing the machine, use a wire rope suitable for the weight of the machine to be removed.
• When removing the machine, use a wire rope suitable for the weight of the machine to be removed. If the machine gets stuck in mud and cannot get out using only its motive power, or in case of breakdown, use a wire rope as shown in the figure on the right. Place wooden blocks between the wire rope and the machine body, in order to avoid damaging the rope and the machine. RWA05390 RWA05390