Komatsu — 3.3.5 MACHINE CONTROLS

INSTRUMENTS AND CONTROLS 11 - OPTIONAL EQUIPMENT CONTROL PEDAL A - (STANDARD PEDAL) This pedal controls the oil flow delivered to the optional equip- ment and can be used only for equipment with unidirectional oil flow (demolition hammer). If the pedal is pressed in (A), high-pressure oil is delivered from the opening (C) and conveyed to the equipment through the left pipe. The right pipe serves exclusively for the return of the oil to the tank. RWA05730 B - (OPTIONAL PEDAL) This pedal controls the oil flow delivered to the optional equip- ment and can have two positions, one for the control of a bidirec- tional oil flow and the other for the control of an unidirectional flow.

BIDIRECTIONAL CONTROL 1 - If the pedal is pressed in (A), high-pressure oil is delivered from the opening (C) and conveyed to the equipment through the left pipe. 2 - If the pedal is pressed in (B), high-pressure oil is delivered from the opening (D) and conveyed to the equipment through the right pipe. RWA05740 RWA05750 UNIDIRECTIONAL CONTROL When equipment with unidirectional oil flow (demolition hammer) is installed, rotate the rear part of the pedal forward, so that it can be operated only with the toe. If the pedal is pressed in (A), high-pressure oil is delivered from the opening (C) and conveyed to the equipment through the left pipe.

The right pipe serves exclusively for the return of the oil to the tank. RWA05760 83