Komatsu — 3.5.3.2 FRONT OPENING WINDSHEILD

GUARDS AND DRIVER’S SEAT 90 CAUTION           • When opening or closing the front windshield, be careful not to crush your hands. Always hold the handles firmly with both hands until the windshield is completely opened or closed. • When the front windshield is open, make sure that the lock engages with the rear coupling. • When closing the front windshield, seize the handles with both hands and move it slowly until the lock engages. • Before opening the front windshield (7), disconnect the wind- shield wiper connector (10) positioned on the right inner side of the cab.

  IMPORTANT • If the front windshield is opened without disconnecting the connector (10), the wiring that supplies power to the windshield wiper motor will certainly be torn. • After pressing the lever (8), open the windshield (7) with the handles (9) while pulling and lifting the windshield. Move the windshield (7) to the correct position, so that it auto- matically couples with the upper retaining seats. To close the windshield, carry out the same operations in the reverse order, after pressing the lever (11).