MAN — Removing and refitting air compressor

Removing and refitting air compressor Removing air compressor Fig. 1 Remove fuel filter. Close cut-off valve from fuel tank to engine. Remove all fuel lines from fuel filter and take off fuel filter complete with EHAB. Caution: The filter cartridges contain fuel. When putting aside the filter, catch emerg- ing fuel in a suitable container. 1 Fig. 2 Remove container together with fuel hand pump too. 2 Fig. 3 Remove oil pressure line, air intake line and com- pressed-air line. Remove the coolant lines. Remove the four mounting bolts and take off air compressor. Attaching air compressor 3 Fig. 4 Thoroughly clean the sealing faces on air com- pressor and timing case.

Screw in the mounting bolts and tighten them to specified torque. Refit the coolant lines. Refit oil pressure line, air intake line and com- pressed-air line. Top up with coolant and check engine oil level. Refit all parts previously removed. Check all lines previously removed to see whether they leak. 4 121