MAN — Crankshaft

137 Service Data Dimensions Limit values Crankshaft rear end (adjacent to flywheel) 1 Max. permissible runout with crankshaft taken up in end bearings: D 2848 LE 2.. at bearing 3 0,06 mm D 2840 LE 2.. at bearing 3 and bearing 4 0,06 mm D 2842 LE 2.. at bearing 4 0,08 mm Standard size: 38,000−38,062 mm (Ø 38 H9) Undersize −0,25 and −0,50: 38,500−38,562 mm (Ø 38,50 H9) Undersize -0,75 and 1,00: 39,000−39,062 mm (Ø 39 H9) 1 = Colour marking for size identification of thrust bearing journal length Undersize −0,25: red Undersize −0,50: white Undersize −0,75: yellow Undersize −1,00:

lilac Main bearing Data for wall thickness and bearing inner diameter also apply to the align- ment bearing standard size: 3.455−3.467 mm undersize −0.25: 3.580−3.592 mm undersize −0.50: 3.705−3.717 mm undersize −0.75: 3.830−3.842 mm undersize −1.00: 3,955−3,967 mm Internal bearing Ø when fitted: standard size: 104.066−104.112 mm undersize −0.25: 103.816−103.862 mm undersize −0.50: 103.566−103.612 mm undersize −0.75: 103.316−103.362 mm undersize −1.00: 103,066−103,112 mm Spread: 0,3−1,2 mm Marking: top / bottom standard size: 0958 / 0959 mm Undersize −0.25: 0962 / 0963 mm Undersize −0.50: 0964 / 0965 mm Undersize −0.75: 0966 / 0967 mm Undersize −1.00: 0968 / 0969