Kaiyi — 4. TRAVEL DEVICE

(1) COUNTER BALANCE VALVE WORK M2 M1 2-19 Check valve "R" 2-20 2-21 2-22 Z Z Check valve "L" 2-6 2-5 Spring "L" 2-4 Spring "R" 2-11 P1 P2 2-24 2-26 2-25 2-3 2-2 -5 -3 -2 -1 -4 2-2 8007A2TM08 When the fluid is supplied from pump to counter balance valve port P1 through control valve, the fluid flows into piston motor through check valve "L" (2-19), and rotate the piston motor. On the other hand, the return fluid from the piston motor flows into the counter balance valve through port M2, but the fluid is interrupted by check valve "R" (2-19), and consequently the pump delivery pressure will increase.

The high-pressure oil at port P1 passes through orifices "L" (2-11) pushes the end of face of spool assy (2-2) and pushes the plunger rightward against spring "R" (2-4) on the opposite side with the force proportional to the pressure. When the hydraulic pressure rises to a certain pressure, spool assy (2-2) starts moving rightward, and the fluid in port M2 passes through the notch machined outer circular of spool assy (2-2) and flows into the port P2, producing a back pressure on the port M2, finally returning into the tank through a control valve.

And when the pump delivery pressure rises, the throttling aperture of the notch in spool assy (2-2) becomes larger, and consequently the backpressure of the port M2 becomes lower. This way, the throttling aperture of the notch in spool assy (2-2) automatically adjusts the area of a return side passage in order to rotate the piston motor with the appropriate speed for Port P1 side flow rate (inlet flow). 2-62