Kaiyi — 4. SINGLE OPERATION

GROUP 4 SINGLE OPERATION 1. BOOM UP OPERATION ARM CYLINDER BUCKET CYLINDER BOOM CYLINDER SWING MOTOR pa10 B9 A9 TRAVEL MOTOR pb9 (34,2) A8 B8 pa5 pc1 pa9 P2 pa11 pb8 pa8 (34,1) DR2 pc2 A7 TURNING JOINT pb3 pb7 pa3 pa7 B7 pc2 pc7 pc6 pb6 A6 B6 pa6 PT PS P1 P2 PH PA PP PS SH P3 A1 A2 FRONT PUMP REAR PUMP PILOT PUMP HYDRAULIC TANK 900L3HC10 When the RH control lever is pulled back, the boom 1 and boom 2 spools in the main control valve are moved to the up position by the pilot oil pressure from the remote control valve. The oil from the A1 and A2 pump flows into the main control valve and then goes to the large chamber of boom cylinders.

At the same time, the oil from the small chamber of boom cylinders returns to the hydraulic oil tank through the boom 1 spool in the main control valve. When this happens, the boom goes up. The excessive pressure in the boom cylinder bottom end circuit is prevented by relief valve. When the boom is up and the control lever is returned to neutral position, the circuit for the holding pressure at the bottom end of the boom cylinder is closed by the boom holding valve. This prevents the hydraulic drift of boom cylinder.

3-12 ps1 pa11 DR1 pc1 Relief valve B5 A5 p pb5 b9 ARM1 B B A A D pa5 PO B4 A4 1 OPTION 1 R7 pc7 A3 Boom holding B3 valve pb3 ARM2 BUCKET Boom holding v BOOM1 TRAVEL-RH STRAIGHT TRAVEL