Some fault codes are not applied to this machine.
5-47 Fault code J1939 SPN J1939 FMI Name Description 1205 190 0 Engine speed Severe overspeed has occured 1201 190 10 Engine speed Overspeed protection, fast over speed 1321 190 15 Engine speed Engine speed has been above the limit 1202 190 16 Engine speed Overspeed protection, over speed 0219 190 20 Engine speed Engine overspeed, value to high C10F 234 2 Software identification The EMS and EEC control units are incompatible D10B 234 19 Software identification Wrong CAN version transmitted by COO 16C1 532 14 Engine speed at high idle Increased idle due to other fault D109 558 2 Accelerator pedal - low idle switch Low idle switch error state from coordinator D107 559 2 Accelerator pedal kickdown switch Kickdown signal defect via CAN 1550 559 9 Accelerator pedal kickdown switch Accelerator pedal kickdown CAN message, faulty D418 559 10 Accelerator pedal kickdown switch Accelerator pedal/kick down switch, EMS and coordi- nator do not agree D105 597 2 Brake switch Brake pedal signal defect via CAN D106 598 2 Clutch switch Clutch pedal signal defect via CAN 0811 598 7 Clutch switch Excessive clutch slip D10D 598 19 Clutch switch CAN-signal or engine shut-down command from OPC for automatic clutch failure, timeout