(3) Warming up pilot lamp ① This lamp is turned ON when the coolant temperature is below 30 C (86 F ). The automatic warming up is cancelled when the engine cool- ant temperature is above 30 C, or when 10 minutes have passed since starting the engine. ② 290F3CD80 (4) Decel pilot lamp ① Operating one touch decel switch on the RCV lever makes the lamp ON. Also, the lamp will be ON and engine speed will be lowered automatically to save fuel consumption when all levers and pedals are at neutral position, and the auto idle function is selected. One touch decel is not available when the auto idle pilot lamp is turned ON. Refer to the operator's manual page 3-36.
② 290F3CD81 (5) Fuel warmer pilot lamp ① This lamp is turned ON when the coolant temperature is below 10 C (50 F ) or the hydraulic oil temperature 20 C ( 68 F ). The automatic fuel warming is cancelled when the engine coolant temperature is above 60 C, and the hydraulic oil tem- perature is above 45 C since the start switch was ON position. ② 290F3CD82 (6) Maintenance pilot lamp ① This lamp will be ON when the consuming parts are needed to change or replace. It means that the change or replacement interval of the consuming parts remains below 30 hours. Check the message in maintenance information of main menu. Also, this lamp lights ON for 3 minutes when the start switch is ON position.
Refer to the page 5-103. ② 290F3CD83 5-92