(3) (3) User mode switch User mode switch ① This switch is used to memorize the current machine operating status in the MCU and activate the memorized user mode. · Memory : Automatically saved after key OFF. · Action : Push this switch. · Cancel : Push this switch once more. Refer to the page 5-99 for another set of user mode. 290F3CD89 ② (4) (4) Travel speed switch Travel speed switch ① This switch is used to select the travel speed alternatively. · : Low speed · : High speed Do not change the setting of the travel speed switch. Do not change the setting of the travel speed switch. Machine stability may be adversely affected. Machine stability may be adversely affected.
Personal injury can result from sudden changes in machine Personal injury can result from sudden changes in machine stability. stability. 290F3CD91 (5) (5) Auto idle/ buzzer stop switch Auto idle/ buzzer stop switch ① This switch is used to activate or cancel the auto idle function. · Pilot lamp ON : Auto idle function is activated. · Pilot lamp OFF : Auto idle function is cancelled. The buzzer sounds when the machine has a problem. In this case, push this switch and buzzer stops, but the warn- ing lamp blinks until the problem is cleared. ② 290F3CD90 (6) (6) Escape/Camera switch Escape/Camera switch ① This switch is used to return to the previous menu or parent menu.
In the operation screen, pushing this switch will display the view of the camera on the machine (if equipped). Please refer to page 5-110 for the camera. If the camera is not installed, this switch is used only ESC function. ② ③ 290F3CD92 (7) (7) Work light switch Work light switch ① ② This switch is used to operate the work light. The pilot lamp is turned ON when operating the switch. 290F3CD93 5-95