3) GEAR PUMP 4) MAIN CONTROL VALVE [ ] : Power boost 5) SWING MOTOR 6) TRAVEL MOTOR 1-24 Item Specification Type Fixed displacement gear pump single stage Capacity 15 cc/rev Maximum pressure 40 kgf/cm2 (570 psi) Rated oil flow 27ℓ/min (7.1 U.S. gpm/5.9 U.K.
gpm) Item Specification Type 9 spools Operating method Hydraulic pilot system Main relief valve pressure 330 kgf/cm2 (4690 psi) [360 kgf/cm2 (5120 psi)] Port relief valve pressure 380 kgf/cm2 (5400 psi) Item Specification Type Fixed displacement axial piston motor Capacity 250cc/rev Relief pressure 300 kgf/cm2 (3360 psi) Braking system Automatic, spring applied hydraulic released Braking torque 165.2 kgf·m (1195 lbf·ft) over Brake release pressure 33.7~50 kgf/cm2 (479~711 psi) Reduction gear type 2 - stage planetary Item Specification Type Axial piston motor Relief pressure 350 kgf/cm2 (4980 psi) Capacity (max / min) 337.2/228.6 cc/rev Reduction gear type 3-stage planetary Braking system Automatic, spring applied hydraulic released Brake release pressure 18 kgf/cm2 (256 psi) below Braking torque 114 kgf·m (825 lbf·ft) over