6-19 2)BOOM, ARM OR BUCKET SPEED IS LOW YES YES Are other YES attachment speeds within Is combination Is speed low only standard levels? of oil streams NO in composite YES normal at boom YES operation? up and at arm Does spool of flow extrusion? summation check NO valve move lightly Are LH/RH travel by hand? speeds within NO NO standard levels? YES Are both LH/RH travel speeds NO YES low? Is MCV pilot pressure within NO standard? NO See Note 3, 4 OK Does the symptom change YES when port relief valve is replaced Does control with other valve? YES NO valve spool move ? See Note 7 Is MCV pilot NO ⓐ pressure within standard level?
YES Is not MCV pilot See Note 3, 4 pressure piping clogged or is not NO there oil leakage? NO YES Is pilot pressure NO Is gear pump ⓑ within standard delivering oil? level? NO See Note 1 AIs engine NO ⓒ revolution within standard level? YES Is not orifice in ⓓ main control YES valve clogged? Is pilot piping clogged or is oil NO leaking from the piping? Is RCV normal? NO NO Cause Remedy ⓐ Normal. Disassemble and repair. Disassemble and repair. Disassemble and repair or replace. Disassemble and repair. Disassemble and repair. Clean pilot piping interior or repair piping. Disassemble and repair. Disassemble and repair or replace. Disassemble and repair. Adjust engine revolution.
Clean orifice in control valve. Clean pilot piping interior or repair piping. Disassemble and repair. ⓑ Flow summation check valve is stuck. Hydraulic pump is faulty. ⓒ ⓓ Port relief valve is faulty. Cylinder is faulty. MCV spool is stuck. RCV is defective. Pilot relief valve is faulty. Gear pump is broken. RCV is faulty.