Kaiyi — 2. MAJOR COMPONENT

7-31 No. Parts Name Appearance Allowance Replacement parts 11 Piston sub assembly When remarkable flaws or high surface roughness are found on sliding surface with swash plate. Roughness : 1.6 a There should be no seizure and remarkable flaws (over 0.02 mm in thickness). Case kit / Perform lapping (#1000). Replace if flaws cannot be completely removed. When remarkable flaws or high surface roughness are found on surface with case. Roughness : 1.2a There should be no seizure and remarkable flaws(over 0.02 mm in thickness). Case kit When clearance between piston sub assembly and case bore is great. Clearance : 0.030 mm When looseness in shoe ball parts is great. Looseness :

0.7 mm 2-2 Spool Assy When remarkable flaws or high surface roughness are found on each sliding surface Roughness : 0.8 a There should be no seizure and remarkable flaws (over 0.02 mm in thickness). Base plate sub assembly When clearance between piston sub assembly and case bore is great. Clearance : 0.050 mm 2-1 Base plate When remarkable flaws or high surface roughness are found on each sliding surface with spool assy. Roughness : 0.8 a There should be no seizure and remarkable flaws (over 0.02 mm in thickness). Base plate sub assembly When clearance between spool assy and base plate bore is great. Clearance :

0.050 mm When remarkable flaws or high surface roughness are found on each sliding surface with valve assy. Roughness : 0.8 a There should be no seizure and remarkable flaws (over 0.02 mm in thickness). When clearance between valve assy and base plate bore is great. Clearance : 0.040 mm When remarkable flaws or high surface roughness are found on each sliding surface with spool assy. There should be no seizure and remarkable flaws (over 0.02 mm in thickness).