7-36 8. CYLINDER Part name Inspecting section Inspection item Remedy Piston rod ·Neck of rod pin ·Presence of crack ·Replace ·Weld on rod hub ·Presence of crack ·Replace ·Stepped part to which piston is attached. ·Presence of crack ·Replace ·Threads ·Presence of crack ·Recondition or replace ·Plated surface ·Plating is not worn off to base metal. ·Rust is not present on plating. ·Scratches are not present. ·Replace or replate ·Replace or replate ·Recondition, replate or replace ·Rod ·Wear of O.D. ·Recondition, replate or replace ·Bushing at mounting part ·Wear of I.D.
·Replace Cylinder tube ·Weld on bottom ·Presence of crack ·Replace ·Weld on head ·Presence of crack ·Replace ·Weld on hub ·Presence of crack ·Replace ·Tube interior ·Presence of faults ·Replace if oil leak is seen ·Bushing at mounting part ·Wear on inner surface ·Replace Gland ·Bushing ·Flaw on inner surface ·Replace if flaw is deeper than coating