(3) Center bypass cut spool assy (24) ① ② Apply loctite to thread of spool, assemble spool end to spool. Be careful not to appling loctite too much. Assemble spool assy, spring seat, spring and tighten plug with O-ring. · Tightening torque : 9.5 ~ 11.0 kgf · m (68.6 ~ 79.7 lbf · ft ) (4) Arm1 regeneration spool assy (20) ① ② ③ Assemble backup rings and O-rings to sleeve respectively. Assemble piston to sleeve which seal is assemble, and insert spool into sleeve. Assemble spool assy, spring seat, spring and tighten plug with O-ring. · Tightening torque : 9.5 ~ 11.0 kgf · m (68.6 ~ 79.7 lbf · ft ) 8-43