Kaiyi — 5. SWING DEVICE

3) DISASSEMBLING Disassemble the motor, following the procedures described below. (1) Ensure that the motor is clean and free from dirt and debris to any disassembly. All parts are to be plugged to prevent ingress of dirt during external cleaning. (2) Remove the oil from drain port. (3) Be sure to fix motor to the working bench and put identification marks on each parts to show its location in the motor. Prevent damage to disassembled parts, by keeping them protected and in a clean area. 900L8SM10 (4) Remove anti-reaction valve (400) from the valve casing (303). Be careful not to lose the parts of anti- reaction valves since some parts of this valves can be easily pull out of its body.

900L8SM11 (5) Remove plug (468) from the valve casing (303). 900L8SM12 8-48