Kaiyi — 5. SWING DEVICE

2) TOOLS AND TIGHTENING TORQUE (1) Thread size used and tightening torques The thread sizes used in the reduction gear and their tightening torque is shown in table below. (2) Tools used ① ② ③ ④ ⑤ Allen wrench (width across flat : 24, 14, 10), socket wrench. Adjustable angle wrench, double (single) open-ended spanner. Hammer, plastic hammer, screwdriver, punch, torque wrench & key. Special jig, liquid panking (threebond no.1217). Tank for shrinkage fit (80-100 degrees centigrade). (3) Special jig 8-64 No. Part name Size Width across flat Tightening torque kgf·m lbf·ft 601 Hex. head screw M16 × 40 24 mm 24.0 173 602 Hex.

socket head screw M16 × 170 14 mm 24.0 173 922 Plug PT 1/4 10 mm 6.6 47.9 Detachment jig of spherical roller bearing (401) Inserting jig of spherical roller bearing (402) Inserting jig of oil seal 280 240 210 230 900L8SM60 215 180 55 75 900L8SM61 155 10 900L8SM62