(2) Put down casing (102) on a level surface. (3) Insert oil seal (801) into front casing (102) using jig. 900L8SM80 (4) Lift up drive shaft assembly using lift-up screw holes on the drive shaft, and insert it to casing. (5) Place the reduction gear in a vertical position with end of drive shaft, face down. 900L8SM81 Insert bearing (402) using jig. (6) 900L8SM82 (7) Insert snap ring (913). (8) Put grease into casing from inlet port of grease. 900L8SM83 8-70