⑪ Install cylinder block assy. Apply hydraulic oil on the surface of piston assemblies (6) and swash plate (9). 8007A8TM34 ⑫ Install friction plates (18) and disk plates (19). a. Apply enough hydraulic oil to disk plate. The circular arc part of the friction plate is set to the cutting lack part of the case. There is a part where teeth are lacked in the spline of disk plate. When assembling the disk plates, match the position of these each parts. b. c. 8007A8TM35 d. Refer to the sectional drawing for the combination of assembling friction plate and disk plate. 8-90 8007A8TM36