Kaiyi — 6. TRAVEL DEVICE

16 Install O-rings (29)(30) on case (1). Install pins (27) on base plate (2-1). Install base plate (2-1) and socket head bolt (9). a. b. c. d. Apply grease to O-ring (25). Do not apply grease to O-ring (30). Be care for direction of pin (27). Apply hydraulic oil to the surface between cylinder block (4) and valve Plate (5). Be care for pilot line of base plate and case (1). Tighten the bolts evenly, as base plate is pushed by spring. 8007A8TM44 e. f. 8007A8TM45 8007A8TM46 17 Place spring (2-13) on valve assy (2-9), and then install valve assy on base plate (2-1). Tighten plug (2-14) with O-ring (2-15).

Place spring guide (2-16) and washer (2-18), and then tighten plug (2-17) with O-ring (2-15). Apply hydraulic oil to valve assy before installation. Apply slight grease to O-rings (2-15). 8007A8TM47 8-93