6120kg In case of bearings (21), gearbox housing (22) or flanged hub (27) replacing, follow the steps here below before proceeding with reassembling. Position the stopper on bearing (21). By using a press apply a load of 6120 kg (13500 lb ) on the stopper. Measure the control value "H" Reduce the thickness "S" of the spacer (18) flattening the bearing areas at the following value; S = 10 - H - 0.1 Assemble the planet carrier (16) to the flanged hub (27) and by a dynamometric wrench find the necessary torque for the gearbox housing rotation (22).
8.2~12.2 kgf · m ( 59.3~88.2 lbf · ft) Bearing inner ring Flanged hub face ① ② 24 23 H 23 ③ ④ 29 8007A8TR64 ⑤ (20) Assemble the spacer (18) on the planetary carrier (16). 8007A8TR66 (21) By using a rubber hammer push the spacer (18) against the shoulder until assembly is completed. 8007A8TR67 8-113