Kaiyi — 7. RCV LEVER

3) DISASSEMBLY Procedures are based on the type L1. (1) Clean pilot valve with kerosene. Put blind plugs into all ports (2) Fix pilot valve in a vise with copper (or lead) sheets. (3) Remove end of boot (23) from case (1) and take it out upwards. 300E8RL01 For valve with switch, remove cord also through hole of casing. 300E8RL02 (4) Loosen lock nut (22) and adjusting nut (17) with spanners on them respectively, and take out handle section as one body. 300E8RL03 Remove the boot (14). (5) 1408DA61 8-124