Remove plate (12). (8) 36078RL05 (9) When return spring (7) is weak in force, plug (8) stays in casing because of sliding resistance of O-ring. Take it out with minus screwdriver. Take it out, utilizing external periphery groove of plug and paying attention not to damage it by partial loading. During taking out, plug may jump up due to return spring (7) force. Pay attention to this. 36078RL06 (10) Remove reducing valve subassembly and return spring (7) out of casing. Record relative position of reducing valve subassembly and return springs. 36078RL07 (11) Separate spool (3), spring seat (6), spring (5) and shim (4) individually. Pay attention not to damage spool surface.
Record original position of spring seat (6). Until being assembled, they should be handled as one subassembly group. 36078RL10 8-126