(4) Adjustment of maximum and minimum flows Adjustment of maximum flow Adjust it by loosening the hexagon nut (808) and by tightening (or loosening) the set screw (954). The maximum flow only is adjusted without changing other control characteristics. ① 8007A2MP06 Delivery flow, Q ( Pilot pressure, P i 808 953 8007A2MP05 Delivery flow, Q Pilot pressure, Pi 2-20 Adjustment of max flow eed Tightening Flow change amount of amount adjusting screw (954) n -1) (Turn) (ℓ/min) Flow change amount (ℓ/min) 00 +1/4 -9.2 ② Adjustment of minimum flow Adjust it by loosening the hexagon nut (808) and by tightening(or loosening) the hexagonal socket head set screw (953).
Similarly to the adjustment of the maximum flow, other characteristics are not changed. However, remember that, if tightened too much, the required horsepower during the maximum delivery pressure (or during relieving) may increase. Spe (min 18 Adjustment of min flow ed Tightening Flow change amount of amount adjusting screw (953) -1) (Turn) (ℓ/min) Flow change amount (ℓ/min) 00 +1/4 +9.2