Kaiyi — 9. BOOM, ARM AND BUCKET CYLINDER

Note that the plated surface of rod assembly (3) is to be lifted. For this reason, do not use a wire sling and others that may damage it, but use a strong cloth belt or a rope. ⑤ Place the removed rod assembly on a wooden V-block that is set level. Cover a V-block with soft rag. Rod assembly Wooden block 36078CY22A (2) ① 23,24 22 16 20,21 15 Remove piston and cylinder head Loosen the set screw (24) and remove steel ball (23). Remove piston nut (22). Since piston nut (22) and piston (16) are tightened to a high torque, use a hydraulic and power wrench that utilizers a hydraulic cylinder, to remove the piston nut (22) and piston (16).

Remove piston assembly (16), back up rings (21), and O-ring (20). Remove the cushion ring (15) ② ③ 900L8CY12 ④ ⑤ Remove the cylinder head assembly from rod assembly (3). If it is too heavy to move, move it by striking the flanged part of cylinder head with a plastic hammer. Pull it straight with cylinder head assembly lifted with a crane. Exercise care so as not to damage the lip of rod bushing (6) and packing (7, 8, 9, 10,11) by the threads of rod assembly (3). Plastic hammer Lift with a crane Pull straight 21078DA35 8-151