4. IDLER AND RECOIL SPRING 1) REMOVAL (1) Remove the track link. For detail, see removal of track link. 45078UC21 (2) Sling the recoil spring (1) and pull out idler and recoil spring assembly from track frame, using a pry. · Weight : 550 kg (1210 lb ) 1 45078UC20 Remove the bolts (2), washers (3) and separate idler from recoil spring. · Tightening torque : 57.9 ± 6.0 kgf · m (419 ± 43.4 lbf · ft ) (3) 2, 3 45078UC19 2) INSTALL (1) Carry out installation in the reverse order to removal. Make sure that the boss on the end face of the recoil cylinder rod is in the hole of the track frame. 45078UC18 8-160 8-160