Kaiyi — 3. SWING DEVICE

2. FUNCTION HYDRAULIC MOTOR SECTION When high-pressure oil passes thought the inlet port (a) of the valve plate (1) and flows into the cylinder as shown in figure, the oil pressure acts upon the piston to generate the axial force "F". This force "F" is divided into two vector forces thought the shoe (2) : namely, the force "F1" vertical to the swash plate (3) and the force "F2" perpendicular to the shaft. This force "F2" is transmitted to the cylinder block (4) via the piston and generates a couple of forces that turn the output shaft.

In the cylinder block nine pistons are equally spaced, and the pintons connected to the high pressure oil inlet ports give their rotating torque to the output shaft sequentially. When the oil inflow/outflow direction are reversed, the rotating direction of the output shaft is reversed. The theoretical output torque "T" is given by the following formula: 1) p Ч q 1 T = · N-m 2 ЧЛ 100 Where p : Effective pressure difference MPa q : Displacement per revolution cm 3 Low pressure oil High pressure oil F1 F2 Swash plate(3) Shoe(2) Piston F Driving shaft Cylinder block(4) Valve plate(1) 900L2SM10 2-50