Kaiyi — 3. SWING DEVICE

4) PARKING BRAKE (1) PARKING BRAKE ON When the swing motor stops the parking brake is normally kept being fixed by mechanical force. When the brake release pressure is blocked, brake piston (702) is pushed by spring (712) force according to the arrow direction ① . Consequently, friction plate (742) which is fixed to cylinder block (111) and separate plate (743) which is assembled to casing (303) are pressed. And then swing motor stops. (2) PARKING BRAKE OFF When the brake releases pressure-supply, the oil flows into room (G). Oil pressure is pressing the spring (712) force, and then brake piston (702) is pushed according to the arrow direction ② .

The pressure of friction plate (742) and separate plate (743) is released. Following this procedure the cylinder block (111) is rotating. 303 111 472 712 111 Cylinder block 303 Casing 472 O-ring 702 Brake piston 706 O-ring 707 O-ring 712 Spring 742 Friction plate 743 Separate plate 712 1 2 702 706 742 743 900L2SM13 2-53