2. FUNCTION HYDRAULIC MOTOR 1) Shaft Piston Sub assemblies Cylinder block Valve plate B Swash plate C 8007A2TM06 Nine piston sub assemblies are assembled in cylinder block. The end face of cylinder block is in contact with valve plate having two half moon shaped ports, B and C (high and low pressure ports). When supplying pressure fluid (pressure P) to B port, swash plate is pushed by the force of piston sub assemblies having F = P · A (A: Piston pressure area). Piston sub assemblies receive the reaction force against it, and produce the reaction force (Ft) in rotating direction.
The total force of high-pressure side piston sub assemblies in rotating direction produces a rotating force in the cylinder block, and the torque is transmitted to shaft through the spline resulting in the rotation of the shaft. 2-60