ENGINE MAINTENANCE - Engine Lubrication and Filter Intervals Engine Oil Capacity and Acceptable Pressures (continued) 2 Engine Lubrication and Filter Intervals Is the vehicle one of those listed below? Delivery truck School bus Fire truck or emergency vehicle If "Yes," select the correct oil drain interval from Table 3. If the vehicle is a recreational vehicle or a vehicle that is not listed, select the correct oil drain interval from Table 4. Perform maintenance at whichever interval occurs first. Oil change intervals for normal and severe duty applications. If "Yes," select the correct oil drain interval from Table 1. If "No," is the vehicle one of those listed below?
The lubricating oil and lubricating oil filter interval can be adjusted based on application, fuel consumption, gross vehicle weight, and idle time. Refuse truck Mixer truck or dump truck NOTE If "Yes," select the correct oil drain interval from Table 2. If "No," is the vehicle one of those listed below? If the equipment is using a remote oil tank in which oil is continuously circu- lated (not an oil make-up tank), the oil in the remote tank must be changed when the oil in the lubricating oil pan is changed. Use the following questions to determine the maximum recommended oil change and filter change intervals in kilometers, miles, hours, or months, whichever comes first.
Shuttle bus Transit bus Y53-1183-1E1 (04/16/18) 47 Oil filter differential pressure to open bypass 50 psi (345 kPa) Lubricating oil filter capacity 1 qt. (0.950 liters) Maximum oil temperature 280°F (138°C) Lubricating oil capacity of standard engine (U.S. qts.) Standard oil pan Pan only 15 qts. (14.2 liters) Total system 17.6 qts. (16.7 liters) High to low (on dipstick) 2 qts. (1.9 liters)