PACCAR PX-7 — Cooling System Maintenance

ENGINE MAINTENANCE - Cooling System Maintenance Table 4: Oil Drain Interval (continued) 2 1. If the type/oil capacity of the oil pan is not known: North America. For extremely cold operating conditions, a 60/40 mixture (coolant/water ratio) can be used to provide freeze protection down to -62°F (-52°C). Cooling System Maintenance Contact a Cummins® Distributor/ Dealer Determine the capacity of the oil pan option for the engine being serviced. Use QuickServe™ Online and the engine serial number For the first oil drain interval, use the 15 qt [14.2 liter] oil drain interval.

When filling the engine with oil, determine the oil capacity of the oil pan Information about concentration and condition of coolant, including filter. Unless otherwise optioned, factory fill coolant is an ethylene glycol, nitrited organic acid technology (NOAT) extended life coolant (ELC) formulation at a 50/50 coolant-to-distilled water mixture. The factory fill exceeds ASTM D6210 and Caterpillar EC-1 requirements. Maintaining coolant chemistry and freeze protection is critical to engine and cooling system component health and longevity. The cooling system in your vehicle was factory filled with extended life coolant that meets or exceeds all ASTM D6210 and Caterpillar EC-1 requirements.

PACCAR recommends only using a 50/50 mixture of distilled water and ELC when cooling system service is required. A 50/50 mixture of ELC and distilled water will provide freeze protection down to –34°F (–37°C), which is adequate for most locations in Y53-1183-1E1 (04/16/18) 51 With 15 qt [14.2 liter] oil pan With 19 qt [18 liter] oil pan Recreational vehicle 15,000 24,000 500 12 20,000 32,000 550 12 Truck crane 9,000 14,500 500 12 12,000 19,000 550 12 Yard spotter 9,000 14,500 500 12 12,000 19,000 550 12 All others 9,000 14,500 500 12 12,000 19,000 550 12